PPPoE

Most probably you already had IP Pools in your Mikrotik, if you don't have Pools then create IP Pools for PPPoE Profile. When a user will connect to the network he will get IP from these Pools.Most probably you already had IP Pools in your Mikrotik, if you don't have Pools then create IP Pools for PPPoE Profile. When a user will connect to the network he will get IP from these Pools.

Number	Attribute	Description
1	Name	Enter the IP Pool Name.
2	Addresses	Enter the IP Pool Addresses.
3	Next Pool	Select the Next Pool.

Create PPPoE Profile

You need to create a PPPoE Profile for each and individual interface so that you can manage your users more effectively. In each interface, you need to select the respective PPPoE Profile, and in PPPoE Profile must set Local Address as interface gateway and Remote Address as Pool. Zal Pro will override this Remote Address if you set Pool name in the Zal Pro package.

Number	Attribute	Description
1	Name	Enter the PPP profile Name.
2	Local Address	Enter the PPP profile Local Address.
3	Remote Address	Enter the PPP profile Remote Address.

Create PPPoE Server

You need to create a PPPoE Server for each interface or for those interfaces which will be used for PPPoE user connection. You must select the correct PPPoE Profile from the dropdown. Each PPPoE Server should have a different PPPoE Profile. Make sure you select only CHAP and PAP authentication.

Number	Attribute	Description
1	Service Name	Click on the PPPoE Servers (+)Plus button. Then enter the name of the service.
2	Interface	Select the interface.
3	Keepalive Timeout	Set the Keepalive Timeout to 10.
4	Default Profile	Select the default profile name.
5	Chap	Select CHAP.
6	Pap	Select PAP.

Config PPPoE For Radius AAA

The most important part is enabling your PPPoE Servers for Radius and Radius Accounting (AAA). You can do that from PPPoE Authentication & Accounting section. Check Radius & Accounting options here. Don't forget to set the Accounting data sending time here which is 00:03:00 (3 Minutes). If you don't need to track data or accounting for data usage then ignore Interim Update time.

Number	Attribute	Description
1	Use Radius	Check the Radius Box.
2	Accounting	Check the Accounting Box.
3	Interim Update	Set the Interim Update Time to a minimum of 3 minutes and a maximum of 15 minutes.